reco GatewayCompleting the reco System the reco Gateway provides a wireless transmission between the reco Server or a PC/laptop and the reco Pad. The reco Gateways transmission works in the less used 5.5 GHz band. Alternative it is possible to switch to the 2.4 GHz band. An auxiliary network switch (five 10/100 MBit/s ports) is attached to build up a small computer network.
The reco Gateway is consistently constructed for the electrical and mechanical requirements of the touring buisness. Its 19” / 1 U format case allows rack mounting. The antennas can be plugged directly on the front sided antenna jacks. It is possible to connect antenna cables between antennas and reco Gateway without removing the device from the rack to get a good transmission in difficult conditions.
The five 10/100 MBit/s ports of the network switch are located on the back side. This allows to build up a small computer network without further accessories. Thus we support devices that are connected via LAN to the reco Server or a PC/laptop.
The reco Gateway works with all mains voltages between 88 and 264 Volts AC.
Neutrik PowerCon connectors are used for mains in and out.
• 5.5 GHz wave-band (optional switching to 2.4 GHz - not recommended for the reco system)
• stable 19” / 1U steel plate enclosure, 144mm depth (without plug connectors)
• fanless working, applicable in noise-sensitive places (FOH)
• front sided antenna ports, Neutrik PowerCon IN and Neutrik PowerCon OUT
• fivefold switch to connect several Lan equipment and/or to build a network
• repeater operation with two or more reco gateways possible to increase the range
• beam antennas are available as optional accessories
• mains voltages 88 to 264 Volt AC, mains frequencies 47 to 63 Hz
Download Flyer |
